Видео

Thank you it’s like so many people are just filming themselves to get views and not really helping us! But you dude are the GOAT!

I’m having an issue where I’ve calibrated my stepper at 100mm but when i cut smaller or larger objects the dimensions are off. What am i doing wrong?

Do you have a puzzle with double lines that you share. I didn't find one in you free download library?

Thanks! Love the channel

Hello Sir. Awesome project and easy to create if you have the file -thank you. Thank you so much for your great ideas. Cheers

Thank you for sharing your creative ideas - always sharing that extra step outside the squares!

I'm pretty sure I've watched this video 37 times. I know i have had to do something wrong. My box keeps coming off of my grid when I put the values in. Any suggestions? Thanks Rich.

Putting a wood block over the material and hitting the block will apply more even pressure and have less chance to break a piece. Or use a rubber mallet

Thanks for he video! Why there is in material settings speed 2000/min but in the parameters was 4000 to 7000?

THANK YOU!!! This is exactly the info I needed. I appreciate the clear and concise explanation.

This cannot be right! If both your tabs and slots are set to 10mm wide, then the tabs will burn to 9.9mm and the slots to 10.1mm (assuming a 0.1mm laser cutting in the middle of the line).So there will be 0.2mm sideways slop. You need to make the tabs 10.1 and the slots 9.9 (or the tabs 10.2 and the slots 10). I think your mistake was adding the kerf to the height of the tab (where it is not needed- the kerf will be subtracted from both the body and the tab) instead of the width.

Just started in the laser game. Very glad to have found your channel! Excellent videos, thank you!

Love the music my friend. I have been a long time viewer awesome content

Do you happen to have a video of how to make picture frames?

Hi Rich, Who's running your storefront set up? I like it, very clean and efficient.

Hello Rick - I like your two patterns. I want to make the welcome sign for an American friend who lives up here in British Columbia Canada.I went to order the signs but when the final order info was made I had to pay $8. What have I done wrong.

looks very warm down there.I cannot imagine the heat and humidity you must have right now.

these are awesome, Thanks!!

Forgot to mention you have a way of explaining the process so an old man can understand

Fantastic presentation, I've been doing woodworking for about 10 years. This past Father's Day my kids gave me an Aufero 2. I am a graphics designer, and my son and I own affordable tint vinyl graphics. The light burn software is much like what I use for vinyl graphics, Except the icons are different. Your videos have helped me so much I want to thank you. Looking forward to more have a blessed day

Don't forget, *you can get both of these signs for free* in my online store using the coupon code in the video until July 4th, 2024!

Love the music! The project too! :)

Where do you get your painted wood?

Thanks Rich

Nice...

Those are COOL. Thanks for sharing

With the open borders, why make a welcome layered project

That's a very cool looking sign. I'll have an Ortur H10 20w as soon as it gets here. I'm graduating from a 5w Laser. Hope to make something like that soon. At the moment I'm still on an updated version of Laser GRBL. I'll look into Lightburn once things settle in.

Thank you Rich!!

Hi Rich, Great to see you!

Thank you!!

Thank you for the video! How is the camera connect? Also by the Ethernet cable our by USB cable?

Hi. If I want to get in to laser cutting ply, which is for marine use case. What do you think is a decent beginner printer on AliExpress today for a good price? I guess I need 80w or even more since it's for cutting 8mm wood. Anything you would recommend or think looks good for a decent price?

Thank you for this! Also, how can you NOT love the contrast of the dark ends??!!

Thanks!

Ha! I love that you have your own theme music. That's so fun! Thanks for the tips on setting magnets too!

About ten years ago did some powder coating on my VW engine . Was beautiful till had a flooded carburetor. The color wound up on the ground .

I use vertical fonts almost exclusively. I'm struggling to find the names of them

Rich - Brill - I was pulling me hair out trying to sort this. Thank You.

Yes what u did WAS scientific (the engineer's version of science) and perfectly acceptable. Ignore the Negative Nancys. To math it out all you need to do is multiply the meters per second with the cross section of the fan to get the Volume of air moved. 4" fan is just over 1 sq ft.. 1 meter is Approx 3.3 feet so each mps speed comes to abt 4 cu ft of air so CFM (cu ft / min) is abt 240 cfm. the actual value with smoke and particulates will be lower since that air is more dense than 'clean' air. even lower when cold or high moisture. This normally wont have an effect on a exhaust system except in the case of weak under powered fans (sch as the computer style case fans).Back pressure from a slight wind can bring those to a stop, lol.

Good tutorial. However i cannot get my rotary roller to spin 360 degrees, it keeps having a jacking sound when i click on TEST.

Just stumbled across this video Rich , once again you’ve made it easy to understand and I’ll be trying this out very soon . You sir are a lightburn Master , and a thoroughly nice chap as well .

How do you even upgrade? When I try I get an error

Very helpful thanks

Thank you!

Hi from germany! I just wanted to send a huge THANK YOU!!! to you, Rich. Your videos are amazing! I‘ve learned so much from your tutorials and it‘s always both, interesting and entertaining to watch your lightburn-lessons! All the best and keep going, you‘re doing a great job !

Thanks, Rich. I haven't had this problem yet, but with Windows, any disaster is possible. 😂 This is in my memory, so I can recall if it does happen.

Great shout Rich, thankfully I’ve never had that issue but I’m running LB on a mac but nice to know it’s there if there’s ever a problem

Rich you really are the master, honestly don't know where many of us would be without your incredible tuition. Thanks very much indeed.

Am I to understand that Lightburn does automatic backups when using the software, or do I need to turn that on somehow?